Incinerator furnace manufacturer

Minimum 50-100% moisture

Items/Model	TS100(PLC)
Principle	Waste Incineration
Waste Treatment	Animal Waste Incineration Treatment
Burn Rate	Average 200 kg/hour
Feed Capacity	Average 1000kg
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	1200L
Internal Dimensions	120x100x100cm
Secondary Chamber	600L
Smoke Filter Chamber	Yes
Feed Mode	Manual
Voltage	220V
Power	0.7Kw
Oil Consumption (kg/hour)	17–36
Gas Consumption (m3/hour)	11–36.7
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	200L
Feed Door	80x60cm
Chimney	10Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	6000kg
External Dimensions	260x150x180cm

Blood, drips, human faces
Human organs
Human tissues
Majority of Cancer treatment wastes
Majority of Pharmaceuticals
Surgery waste
Syringes/Needles/Sharps
Apart from the manual loading of waste, the incinerator should be automatic and easy to use or Plug and play modal
The incinerators shall be able to be operated with the following three forms of fuel and gas: Diesel, LPG and N-Gas.
Maximum load capacity of a minimum of 100kg
Burn Rate of anywhere between 50 – 80 kg/hr
Thermal Capacity 190 kwg/hr or less

Fuel Fillers,Blast Tubes,Nozzles
Diffusers,Primary & Secondary Chamber Thermocouple
Burner Ionization Probes,Burner Ionization Leads
Burner Flame Control Box,Burner ignition transformer
Complete spare burner,Thermal Resistor
It should use a Power Supply of 50/60Hz or 210/230v
A minimum of 2 chambers 
The walls of each chamber should be constructed with high grade refractory brick of a thickness anywhere between 210 – 240mm 
Each chamber should have combustion burner air fans which are automatically controlled to ensure efficient heat distribution
The supplier shall be able to provide and replace all below mentioned major spare parts for a period of 5 years (from delivery), at their own cost.