Scrubber must be very multi-disciplinary with ability to remove solids, mist and gasses
simultaneously while also providing cooling.
Average 100 kgs/hour
Average 200 kgs
Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Diesel Oil/ Natural Gas/LPG
Oil Consumption (Diesel Oil)
Gas Consumption (Natural Gas)
130 x 100 x
220 x 180 x
Oil Tank Capacity(if oil fuel)
Equipment Gross Weight
Operation Technical Specifications
Primary Chamber Temperature
Secondary Chamber Temperature
Waste Lower Calorific Power
Water treatment unit to treat the water used in Wet Scrubber before opening it into main drain.
System has settling tank with minimum thickness of 3mm.
Circular Mild Steel / Stainless steel with minimum thickness 3mm, self-supported flange section chimney and should have suitable door/window at the base for cleaning.
Proper port for taking exhaust gases sample to monitor emission levels as per international
Chimney should have height of at-least 15 meters from ground level.
PLC based control box with hinged sealed door, pre-installed control circuitry should be
It should house the ignition burner time, feed interval timer, shutdown timer post combustion
Digital display of temperature and set timing parameters.
Emergency shutdown button for shutting all burners and blowers in case of emergency.
All design and installation must be in accordance with electrical safety rules.
Electrical inputs available single phase 220 V, 50 Hz: Three Phase 400 Volts ± 10 %.
Smokeless emission for all the running time. 7,000 each Total Qty 21,000
Mask for order(May be provided locally)
Incinerator Operator Costume Note:
All following accessories of operator may be provided locally
04 x Fire protective complete dress for operators
10 x Pairs of leather gloves for hospital waste handling staff.
10 x Pairs of long rubber shoes for hospital waste handling staff