Model

WS-100

Picture

Burning Rate

Average 100 kgs/hour

Feed Capacity

Average 200 kgs

Primary Combustion Chamber

1200 Liters

Secondary Combustion Chamber

500 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Wet Scrubber System

Feed Mode

Manual

Voltage

220V

Power

2Kw

Fuel Type

Diesel Oil/ Natural Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

14--28 kg/hour

Gas Consumption (Natural Gas)

10--32.2 m3/hour

Internal Dimensions

130 x 100 x 90cm (primary chamber)

External Dimensions

220 x 180 x 360cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

900 Liters(average 3 days)

Door Opening

55 x 80cm

Chimney Length

10.0 Meters

Chimney Type

Stainless Steel

Equipment Gross Weight

11000 kgs

Operation Technical Specifications

Primary Chamber Temperature

800-1000

Secondary Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Burning Efficiency

98%

Waste Lower Calorific Power

3000Kcal


PROCESS MINIMUM 1 TON PER DAY
OPERATED WITH LIMITED TRAINING
REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING
COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS
ABILITY TO BURN WASTE LUBRICANTS (POL)
HANDLE ORGANIC SOLIDS (TO INCLUDE RMW)
DEPLOYABLE
MOBILE
24 HRS OF CONTINUOUS USE
AUTOMATIC LOADING SYSTEM
AUTOMATED ASH REMOVAL SYSTEM
GAS SCRUBBING SYSTEM
95% REDUCTION OF SOLID WASTE
OPERATE OFF DIESEL OR FUEL OIL
CAPABLE OF BURNING 4 UNITS OF WASTE PER UNIT OF FUEL
ABLE TO TAKE ALL COMBUSTIBLE WASTE TO INCLUDE: PAPER, PLASTIC, CARDBOARD, FOOD, USED OILS, SLUDGE, OILY RAGS, WOOD PALLETS.
NO PRE-TREATMENT OF WASTE REQUIRED
FIVE (5) YEAR COMPONENT WARRANTY
OPERATION MANUAL AND TRAINING MANUAL FOR EACH INCINERATOR
SET UP AND INSTALLATION INSTRUCTION MANUALS
BLUE PRINT/ SCHEMATIC PROVIDED THAT OUTLINES THE PHYSICAL DIMENSIONS OF THE 20’ INCINERATORS
INCINERATORS COMPOSED WITH HEAVY DUTY WELDED CONSTRUCTION
OPERATED AND TRANSPORTED IN 20’ INCINERATORS (CONTAINERS)
FULL FRONT AND OPTIONAL REAR ACCESS
PRIMARY / SECONDARY TEMPERATURE CONTROLS
The incinerator unit shall be suitable and sufficient to process domestic waste streams generated by the Camp without compromising International air quality standards. The contractor shall submit a proposal for approval prior to placing any orders for packaged Incinerator Units. Failure to do may result in rejection of equipment on the basis of unsuitability for purpose.

The Incinerator shall be containerised, self-contained incorporating its own power supply and fuels storage. It shall have a minimum capacity of 900Kgs and be rated to burn around 150kgs per hour. The unit shall be top loading design or approved alternative with heavy duty refractory cement lining. The unit shall be reaching temperatures around 1000 deg C in the primary and secondary chamber to provide complete combustion of domestic waste.
Primary and Secondary Chambers – Heavy duty steel casing, High quality refractory lining and insulation. Large full size top load counterbalance door. Diesel fired ignition burner.2 second gas residence time.
Chimney C Heavy duty stainless steel casing.

Categories:

Tags:

Comments are closed

www.waste-incinerator.net
Open chat
Powered by