Average 10 kgs/hour
Average 20 kgs/feed
Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Diesel Oil/ Natural Gas/LPG
Oil Consumption (Diesel Oil)
Gas Consumption (Natural Gas)
100 x 60 x
145 x 90 x
Oil Tank Capacity(if oil fuel)
Equipment Gross Weight
Operation Technical Specifications
Primary Chamber Temperature
Secondary Chamber Temperature
Waste Lower Calorific Power
Ancillaries C self-contained diesel generator with integral fuel tank and pipework. Operating and maintenance manuals,
Incinerator should have two (2) chambers: primary chamber with five (5) burners to incinerate materials and the secondary
The main body of the incinerator shall be stainless steel and the outside insulation thickness of not less than 7 mm made from
The main gate of the Incinerator should be 150 mm thick and strength not less than 170 kg/m3. The door should be automatic with remote to operate.
The Incinerator should be designed in accordance of the environmental regulation followed in country of origin or as per Saudi Arabian PME Regulations.
The incinerator should have fuel storage with capacity of 1000 liter.
The incinerator shall have the capacity to operate with temperature up to 1300 OC in the primary chamber and it can
The inside body of the incinerator should have insulation layer made of calcium with thickness of 50 mm while the thickness
All the supporting braces of the incinerator shall be installed on stainless steel.
The gap between the internal and external body shall be filled with the special insulation material.
The exhaust shall not stay more than two (2) seconds in the secondary chamber and this chamber shall be built with high density of ceramic oasis.
There should be a stack with four (4) meter from the top surface of the incinerator and can be removed and installed.
The incinerator shall have control device for exhaust gases so that the emission shall meet the PME source standards
The power supply should be 220 C 380 Volts, 60 Hz. and the incinerator shall be provided with control panel showing the following:
Mobile medical wasteincinerator Capacity: 20 C 30 KG/H
Flue gas treatment based on multi pollutants control ap- proach to remove hazardous content of the combustion gasses